Toll Free 9525110001
About the Journal
About the Journal

This journal intends to capture and achieve the advancing boundary of knowledge and technology by encouraging researchers and academicians to present and discuss matters of major interest in the field of Engineering and Science. This journal publishes and promotes original research papers, experimental works, case studies and review papers related to the broad spectrum of Civil engineering, Computer Science Engineering, Mechanical Engineering, Electrical and Electronics Engineering, Electronics and Communication Engineering and Applied Science and Technology.

This journal is targeting at having content published in peer-reviewed, indexed with International Databases and having high impact factor. It aims to the reader very best analysis and discussion in the development of nation and world in the field of Science and Engineering.


The Journal is intended to provide a platform for scholars to share their knowledge and innovation in the field of Science and Engineering. It also aims to enhance the interdisciplinary studies for development of new era of Technology, industry and society. The Journal is encompasses all related sub-topics of different disciplines of engineering as well as Applied sciences. Journal aims to give emphasis on empowering the scholar to maximizing their potential.


The journal covers all the areas not limited to:

Engineering & Technology
Civil Engineering
  • Coastal and Harbour Engineering
  • Environmental Engineering
  • Geotechnical Engineering
  • Highway Engineering
  • Structural Engineering
  • Surveying and Geo-Spatial Engineering
  • Geological Engineering
  • Transportation Engineering
  • Tunnel Engineering
  • Water resources engineering.
Electrical and Electronics Engineering
  • Control System
  • Power Electronic
  • Power System
Mechanical Engineering
  • Hydromechanics, aerodynamics, Thermodynamics
  • Principle of micro-macro transition
  • Constitutive relations and micro structure property relation
  • Elastic, plastic behaviour, high temperature fatigue and fracture
  • Metals, Polymers, Ceramics, intermetallic
  • Machining, non-conventional machining, material processing.
  • Stability of mechanical system, mechanics & continuous
  • Heat transfer, Thermal field and Nano fluid and others
  • Image processing
Electronics and Communication Engineering
  • Micro wave
  • VLSI Design and IC Technology
  • Image processing
  • Signal Processing
  • CMOS Se
Computer Science and Engineering
  • Image processing
  • Data mining, Big data, Data Science
  • Machine Learning/Deep Learning
  • Soft Computing
  • Cryptography and Network security
  • Software Engineering
  • Bioinformatics
  • Biomedical and others
Applied Science & Technology
  • Fibre Optics
  • Nano Technology
  • Mathematical Modeling,
  • Groundwater Hydrology
  • Numerical Analysis
  • Seismology
  • Partial Differential Equation
  • Physical Chemistry
  • Environmental Chemistry
  • Analytical Inorganic, and Organic Chemistry
Publication frequency

Biannual (Twice a year)

Types of articles accepted
  • Research and innovation work.
  • Review Papers.


This journal is devoted to publishing original high quality research work; peer reviewed in all major fields in science, Engineering & Technology. The journal also invited expository research works. The main emphasis of this journal is to publish research works related to the recent technology.

The journal invite to publish high quality research paper in all major fields of mathematics (i.e., Fluid Dynamics, Groundwater Hydrology, Solute Transport Modeling, Solid Mechanics, Mathematical Modelling, Optimization Technique, Celestial Mechanics etc), Physics, Chemistry and various branches of Engineering and technology. The major objective is to share knowledge which may be used in Science & Technology and the research works collaborating significant current developments in all major fields of specialization of Science & Technology.

  • To aqueduct the significant gap between research and development by promoting the publication of original, novel and industry relevant research.
  • To produce best quality research paper based on theoretical and application based experimental works for the publication globally.
  • The objective of the journal is to publish and discuss fundamentals, applications and experiences in the field of remote engineering, cyber-physical systems, virtual instrumentation and online simulations.
Advisory & Editorial Board


Prof. (Dr.) Gopal Pathak
Vice Chancellor
Sarala Birla University, Ranchi


Prof. Dr. V.K Singh
Sarala Birla University
Birla Knowledge City, P.O: Mahilong, Purulia Road
Ranchi, Jharkhand- 835103, India 9431385023 / 7903487242


Dr. Megha Sinha
Assistant Professor
Faculty of Computer Science & Engineering
Sarala Birla University, Ranchi 9304075067


Prof. (Dr.) Vishnu Priya
Director IIIT Ranchi
Professor, Electronics Engineering Department,
IIT (ISM) Dhanbad, India

Dr. Debi Prasanna Kanungo
Senior Principal Scientist & Professor
Group Leader, Geo-Hazard Risk Reduction Group(GHRR)
CSIR- Central Building Research Institute (CBRI)

Prof (Dr) Tchanguiz RAZBAN
Director of International Cooperation of the Polytech Nantes
Graduate School of Engineering of the University of Nantes
University of Nantes, France

Prof. D.K.Singh
Director, B.I.T Sindri
Faculty of Electronics & Communication Engineering.
B.I.T, Sindri , Dhanbad

Dr. Anurag Jain
Professor, Director
Radharaman Engineering College

Prof. (Dr.) M. P. Singh
Faculty of Computer Science & Engineering
NIT Patna,Bihar

Dr. Tarkes Dora P.
Scientific Assistant
Karlsruhe Institute of Technology (KIT)
Institute of Engineering Mechanics
Karlsruhe, Germany

Prof. (Dr.) Ranjit Prasad
Associate Professor & Ex Head
Dept. of Metallurgical & Materials Engineering,
NIT Jamshedpur

Prof. Dr. Michel Hassenforder
Institut IRIMAS / Département Informatique
Universite de Haute Alsace

Prof. Ranjeet Kumar Singh
Faculty of Chemistry
BIT Sindri, Dhanbad

Dr. Subani Bara
Principal Nursing
Mahadevi Birla Institute of Nursing & clinical Technology

Dr. Sanjeev Kumar
Assistant Professor
Faculty of Electrical and Electronics Engineering
Sarala Birla University, Ranchi

Dr. (Prof) Sitesh Kumar Sinha
Professor, Registrar
Faculty of Computer Science,
Dr. C.V. Raman University, Bihar

Dr. Partha Paul
Associate Professor
Faculty of Computer Science
Sarala Birla University, Ranchi

Prof. Shridhan B. Dandin
Associate Professor
Department of Computer Science & Engineering
Sarala Birla University, Ranchi

Sanjeev Kumar Sinha
Associate Professor
Faculty of Commerce & Management
Sarala Birla University, Ranchi

Dr. Pintu Das
Assistant Professor
Faculty of Mathematics
Sarala Birla University

Advisory Board

Prof. (Dr.) Pradeep Kumar Mishra
Jharkhand University of Technology-JUT
Ranchi, Jharkhand

Prof. (Dr.)P.S.Bhatnagar
Retired Director, BKBIET,
Pilani, Rajasthan

Prof. (Dr.) S.K Singh
Retired Director
Faculty of Mechanical Engineering
B.I.T Sindri, Dhanbad
Vinoba Bhave University

Dr. Saranjit Singh
Director (Industry Engagements & Placement)

Professor, Faculty of Mechanical Engineering
KIIT Deemed to be University, Bhubaneswar

Prof. R. P. Sharma
Retired Professor,
Department of Civil Engineering
B.I.T Sindri, Dhanbad

Prof. (Dr.) Sandhir Kumar Singh
Faculty of Physics
IIIT, Ranchi

Author’s guidelines
  1. The manuscript submitted by authors should include their names, affiliations and contact details. Manuscript and page containing author details should be sent through e-mail only
  2. While submitting the manuscript, corresponding author should give undertaking that the work is original and it has previously not been published anywhere else and also it has not been submitted anywhere else for being considered.
  3. In no situation the Publisher would be responsible for any plagiarism issue and it would be sole responsibility of authors.
  4. Manuscripts Guidelines:
    Authors are strongly encouraged to submit manuscripts online. This will allow even quicker and more efficient processing of your manuscript.
    Manuscripts should be typewritten or prepared on a word processor, with all material double-spaced, on one side of letter-sized paper, with suitably wide margins. All pages should be numbered consecutively, beginning with page 1, the title page. Tables and figures should be numbered serially, and legends to illustrations should be prepared on separate sheets. Tables and figures will be placed near their first mention in the text; all tables and figures must be referred to in the manuscript.

    Title Page: The following elements must be included:
    Title of the article:
    Name(s) and initial(s) of author(s), preferably with first names spelled out;
    Affiliation(s) of author(s);
    Footnotes to the contribution title;
    Name, address, telephone and fax numbers, and e-mail address of the corresponding author.

    Abstract: Each article is to be preceded by a succinct abstract, of up to 250 words, that highlights the objectives, methods, results, and conclusions of the paper. Key Words: To identify the subjects under which the article may be indexed, 6-10 key words should be provided.

    References: In the text, references to the literature should be by author and year; where there are two authors, both should be named; with three or more only the first author's name plus "et al." need be given. The list at the end of the paper should include only works mentioned in the text and should be arranged alphabetically by name of first author. References should be cited as follows:
    Journal papers -name(s) and initial(s) of author(s), year in brackets, full title, name of the journal as abbreviated in Chemical Abstracts, volume number, first and last page numbers:
    Quiring R, Walldorf U, Koter U, Gehring WJ (1994) Homology of the eyeless gene of Drosophila to the small eye gene in mice and aniridia in humans. Science 265:785
    Responsibility for the accuracy of bibliographic references rests entirely with the author, who is requested to use as few "in press" citations as possible. In press citations must include the name of the journal that has accepted the paper.

    Footnotes: Those in the text should be numbered consecutively. Footnotes to the title or authors of the article are marked by asterisks and placed on the title page.

    Sequences: Sequences that are used merely as data points in statistical calculations or graphs should, if possible, be referred to by their accession numbers only. Authors should be quoted by name when their sequences are discussed individually or presented in alignments.

    Illustrations: These should be suitable for reproduction, and should clarify or shorten the text. Information provided in figure legends should not be repeated in the text. Figures and graphs should always be mentioned in the text and numbered with Arabic numerals. Preferred file formats include .tif and .jpg; please see Manuscript Central for more details.

    Color Figures: Color can be used without charge for the electronic edition of the journal but will appear in the printed version of the journal at the author's expense: $1150.00 per article.

    Computer Software: Any software referred to among methods used must be obtainable either commercially or upon request from the authors. In submitting a manuscript to the Journal, authors accept the obligation to furnish upon request any information necessary for reproducing the methodologies on which their results are based. The methods used for preparing and analyzing alignments must be stated precisely.

    Mathematical Equations: These should be clearly prepared, and annotated if necessary. Primes and dots must be called to the attention of the typesetter. Differentiate legibly between number 1, capital letter I, and lower case letter l. Use fractional exponents instead of root signs and the solidus (/) for fractions wherever their use will save vertical space. Use exp () notation when the exponent is sizable. All equations must be numbered sequentially, on the right-hand side of the column, in parenthetic Arabic numerals.

    Organisms: Must be identified by their scientific binomen.

    Homology: The term should not be used in the sense of structural similarity but only in its biological sense of derivation of structures from a common ancestral structure.

    Abbreviations, Symbols, Units, etc.: Acronyms and symbols must be defined at first mention, in titles, abstracts, as well as within the text. For nomenclature, abbreviations, symbols, and units, authors should follow internationally accepted rules, including those adopted by the Commission on Biochemical Nomenclature.

    Guidelines for Electronically Produced Illustrations for Print: Upload illustrations separately from the text (i.e. files should not be integrated with the text files).

    Vector (line) Graphics
    Suitable drawing program: Adobe Illustrator. For simple line art the following drawing programs are also acceptable: Corel Draw, Freehand, and Canvas.
    No rules narrower than .25 pt.No gray screens paler than 15% or darker than 60%.
    Screens meant to be differentiated from one another must differ by at least 15%.
    Halftone Illustrations
    Black & white and color illustrations should be saved in TIFF format.Illustrations should be created using Adobe Photoshop whenever possible.
    Scans: Scanned reproductions of black and white photographs should be provided as 300 ppi TIFF files.Scanned color illustrations should be provided as TIFF files scanned at a minimum of 300 ppi with a 24-bit color depth.
    Line art should be provided as TIFF files at 600 ppi.
    Graphics from Videos Separate files should be prepared for frames from a video that are to be printed in the journal. When preparing these files you should follow the same rules as listed under Halftone Illustrations.
  5. Authors willing to include figures, tables or text passages that have already been published elsewhere are required to acquire consent from the copyright owner(s) for both the print and online format and to include proof that such consent has been approved while submitting their work. Any material received without such evidence will be assumed to originate from the authors.
  6. References should be cited at the end of the paper only. Authors are required to follow APA style of referencing. Reference list should contain all the sources which are mentioned in the main text of the manuscript. Reference list entries should be alphabetized by the last names of the first author of each work.
  • All tables and figures must be appropriately numbered and labelled. Sources must be cited wherever necessary.
  • Correspondence and proofs for correction will be sent to the corresponding author.
All correspondence should be addressed to:

Chief Editor
Department of Science & Engineering
Birla Knowledge City,
PO- Mahilong, Purulia Road,
Ranchi, Jharkhand 835103
Mail ID:
Ph. No: 9431385023 / 7903487242

Copy Right Transfer and Declaration
Contact Us
Principal Contact
Prof. (Dr.) V.K Singh
Sarala Birla Unversity
Contact No.: 9431385023 / 7903487242

Birla Knowledge City, P.O: Mahilong, Purulia Road
Ranchi, Jharkhand- 835103, India